Ripsaws FLS

The advantage of the machine is high speed and accuracy of cuts and a high degree of flexibility of input and output dimensions of the processed material. FLS Arrow is valued in furniture workshops, production of semi-finished for windows, doors and stairs. It also operates successfully in the processing of large materials, carpentry workshops and in the manufacture of wooden buildings. The machine can be also used for cutting non-wood materials, e.g. polyurethane panels, sandwich panels, plastic plates, aluminium plates, etc. Of course, there are security features that ensure the security of work on the rip saw. The machine fulfils the strictest demands on the security of work follows from relevant EC regulations and directives.

Setting and mode of the saw

Cutting material, loosely put down on the desktop, is cut lengthwise by movable saw-blade. After the cut, the saw blade retracts under the work table of the saw and passes to the starting position. The rear longitudinal backstop (ruler) moves the cut material on a new value of the width of cut. 

Advantages

The rear backstop allows easy and quick setup of the width of cut. Values can be automatically selected using the three software systems:

Absolute settings – provides the automatic drive of material to be cut to the selected width.

Chain setting – the automatic movement to the specified value (decrease of the total width + saw kerf).

Optimization system – the automatic combination of widths in one material according to the operator preset values (width optimization for maximum yield).

Standard equipment

- Infinitely adjustable blade feed speed 0 – 80 m/min -  guarantees high cutting performance.

- Infinitely variable feed speed using a foot pedal or a control panel of the machine.

- Control of the stroke blade ensures a clean cut and cut surface quality.

- Quick cramping of the saw blade- changing the blade is easy and safe.

- Laser - The saw is equipped with a laser, which ray distinguishes the cutting line on material and allows precise adjustment of the cut. 

FLS Arrow – represents solidity and precision

Rugged and tough welded machine frame is made as a self-supported steel construction with a central prop and high ground clearance together with the precise guidance of a saw unit ensures a long service life. 

Possible extension

•pneumatic pressure 3 000 mm (may be multiplied by the length of cutting machines)

•increase of the cutting width to 3000 mm

•engine 15 kW

•metal rollers

•metal plate with 6 pieces of rolls

•chains for material handling in the machine table

•overhead backstop (allows pasting material from the back of the machine)

•cross table – base + measurement

•cross table – additional