One-blade Ripsaw FLS 120/160 ECO

Modern processing technology of solid wood with using one blade rip saw FLS 120 ECO (FLS 160 ECO) significantly increases yield and productivity and values the quality of wood material. Emphasis on the cut quality and simplicity of service is a matter of fact.

FLS-ECO_final_bl

Highly universal saw FLS 120 ECO (FLS 160 ECO) finds application mainly in small and medium-sized plants. The FLS 120 ECO (FLS 160 ECO) can cut prisms, planks, beams and large-area material. Input materials can be plastered, trimmed, formatted and it is possible to produce cardboard plates and lamellae. It can be cut at an angle and miter.

The advantage of the machine is high speed and accuracy of cuts and high degree of flexibility of input and output dimensions of the processed material. FLS 120 ECO (FLS 160 ECO) is valued in furniture workshops, production of semi-finished products for windows, doors and stairs.

The machine can be also used for cutting non wood materials, e.g. polyurethane panels, sandwich panels, plastic plates, aluminum plates, etc.

Of course there are security features that ensure security of work on the rip saw. The machine fulfils the strictest demands on security of work follows from relevant EC regulations and directives.

Possibilities of material processing on saw FLS 120 ECO (FLS 160 ECO)

fls1 fls2 fls3
fls4
fls6 fls7

Setting and mode of the saw

Cutting material, loosely put down on the desktop, is cut lengthwise by movable saw-blade. After the cut the saw blade retracts under the work table of saw and passes to the starting position. The rear longitudinal backstop (ruler) moves the cut material on a new value of the width of cut.

Radek_u_FLS_ECO

Advantages

The rear backstop allows easy and quick setup of the width of cut. Values can be set by using a joystick and digital display or with the speed dial buttons – where can be set up to 15 values of the width of cut. These are values between the rear backstop and saw blade, so called the absolute dimensions. As an option the machine can be equipped with management by following programs:

Chain setting – the automatic movement to the specified value (decrease of the total width + saw kefr).

Optimalization system – automatic combination of widths in one material according to the operator preset values (width optimization for maximum yield).

Infinitely adjustable blade feed speed 0 – 60 m/min. guarantees high cutting performance. Infinitely variable feed rate with the control panel of the machine. Control of the stroke blade ensures a clean cut and cut surface quality. Changing of the blade is easy and safe – quick cramping of the saw blade. The saw is equipped with a laser, which ray distinguishes the cutting line on material and allows precise adjustment of the cut.

FLS 120 ECO (FLS 160 ECO) – represents solidity and precision

Rugged and tough welded machine frame is made as a self-supported steel construction with a central prop and high ground clearance together with precise guidance of a saw unit ensures a long service life.

Possible extension, options

  • pneumatic pressure 3 000 mm
  • engine 15 kW
  • metal rollers
  • metal plate 6 pack rolls
  • starting pedal in machine length
  • cross-table - base + measuring
  • cross-table  - additional
  • extended program control of backstop chain + optim, reading from the two-line display

Technical data of FLS 120 ECO / FLS 160 ECO

Engine

11 kW or15 kW, 2900 rev/min.

Cut height

standard 0 - 120 mm (0 - 160 mm)

Saw blade

Ø 450 - 550 mm (FLS 160 ECO 450 - 550 mm)

Inner Ø of a saw blade

Ø 80 mm

Speed feed into the cut

0 - 60 m/min, infinitely adjustable

Cut lenght

standard až 3,2 m - 6,2 m

Cut width

standard 420 mm (450 mm)

Working height

850 ± 50 mm

Outer dimensions

Length = cut length + 1800 mm

Exhaust tunnel duct Ø

2 x 160 mm

Exhaustion speed

25 - 30 m/s