Loading page...

User was logged out

Incorrect name or password

FLS Technology

FLS Technology

One blade ripsaw FLS 120/160 ECO

Modern processing technology of solid wood with using one blade rip saw FLS 120 ECO (FLS 160 ECO) significantly increases yield (about 10-15%) and productivity and values the quality of the wood material. Emphasis on the cut quality and simplicity of service is a matter of fact. Highly universal saw FLS 120 ECO (FLS 160 ECO) finds application mainly in small and medium-sized plants. The FLS 120 ECO (FLS 160 ECO) can cut prisms, planks, beams and large-area material. Input materials can be plastered, trimmed, formatted and it is possible to produce cardboard plates and lamellae. It can be cut at an angle and mitre.

The advantage of the machine is high speed and accuracy of cuts and a high degree of flexibility of input and output dimensions of the processed material. FLS 120 ECO (FLS 160 ECO) is valued in furniture workshops, production of semi-finished products for windows, doors and stairs. The machine can be also used for cutting non-wood materials, e.g. polyurethane panels, sandwich panels, plastic plates, aluminium plates, etc..  Of course, there are security features that ensure the security of work on the rip saw. The machine fulfils the strictest 


Frame of the machine

Rugged and tough welded machine frame is made as a self-supported steel construction with a central prop and high ground clearance together with the precise guidance of a saw unit ensures a long service life. 


Setting and mode of the saw

Cutting material, loosely put down on the desktop, is cut lengthwise by movable saw-blade. After the cut, the saw blade retracts under the work table of the saw and passes to the starting position. The rear longitudinal backstop (ruler) moves the cut material on a new value of the width of cut.demands on the security of work follows from relevant EC regulations and directives.


Advantages

The rear backstop allows easy and quick setup of the width of cut. Values can be set by using a joystick and digital display or with the speed dial buttons – where can be set up to 15 values of the width of cut. These are values between the rear backstop and saw blade, so-called the absolute dimensions.


Standard equipment

- Infinitely adjustable blade feed speed 0 – 60 m/min. guarantees high cutting performance.       

- Infinitely variable feed rate with the control panel of the machine.

- Control of the stroke blade ensures a clean cut and cut surface quality.

- Replacement of the blade is easy and safe – quick cramping of the saw blade.

- The saw is equipped with a laser, which ray distinguishes the cutting line on material and allows precise adjustment of the cut.



As an option the machine can be equipped with management by following programs:

Chain setting – the automatic movement to the specified value (decrease of the total width + saw kerf).

Optimization system – the automatic combination of widths in one material according to the operator preset values (width optimization for maximum yield).

   

Possible extension

- pneumatic pressure 3 000 mm

- engine 15 kW

- metal rollers

- metal plate 6 pack rolls

- starting pedal in machine length

- cross-table - base + measuring

- cross-table  - additional

- extended program control of backstop chain + option, reading from the two-line display


Engine power

1kW, 15kW option), 2900 rpm

Cut height standard0- 120 mm/ 0-160 mm 
Saw bladeØ 450 to 500 mm Ø 550 mm
Inner Ø of the saw blade
Ø 80 mm
Speed feed into the cut
0 - 60 m/min
Cut length standard

2,2 - 7,2m (option up to 16,2m)
Cut width standard
420 mm (option up to 1600 mm)
Working height
850 ± 50 mm
Outer dimensions
Length = cut length  + 1800 mm

Width = 1300
Exhaust
2x 160 mm
Required exhaust speed
25 - 30 m/s
Pressurized air connection0,8 Mpa